FOR CIRCULAR PARTS
- Extended poly vinyl chloride, self-adhering, 100% pin
- Giant 500' roll, with 40% stretch gives 700' uses.
- Clings to corners! Its stretch ability makes it
fit into grooves and crevices causing a complete leak-proof wrap
(much like shrink wrap)
- Mask 2 to 3 times faster than with adhesive using new
reverse wrap method.
- Fuse end with solvents, heat, adhesive tapes, etc.
- Sizes: 3/4", 1", 1 1/2", 2", 3", 4" X 500'
CUSTOM SIZES AVAILABLE
- All plating solutions, especially Hard Chrome.
- Type ll and lll anodize.
- Abrasive Blast - Customer reports sand blasting 30
minutes using 2 layers of GSV-1 @ 60 to 100 P.S.I. media sizes 180 to
50. Its rubber-like qualities cause media to bounce off like
rubber liners in t he blast booths, Vapor Blast.
- Paint - Customer reports using in Boeing Epoxy primer
sprayed on anodized aluminum substance.
- Chemical milling on circular parts.
- Masking top of printed circuit boards to protect from
fumes - sticks only to itself.
- Harness wrapping.
- Protective wrap of parts to prevent corrosion.
- Pipe wrap.
|100% Pinhole Free PVC
Tensile strength lb./in. width: 49.4
290% elongation at break.
Di-electric strength volts: 15,000
Shelf life: 5 years @ 72°
Self adhering - adhesive
Ends seal with solvents, heat, adhesive tapes, etc.
corners and edges
Replaces masking tape in wax process or paper
wherever it can wrap over itself.
SC-1 YELLOW ADHESIVE TAPE
PHOTO COURTESY OF DELTA AIRLINES
- MATERIAL: Extended Poly Vinyl Chloride
- THICKNESS: 5 1/2 to 6 mils
- LENGTH: 66'
- ADHESIVE: Hycar Nitrile type
- TEMPERATURE RANGE: +5º to 210º F
|SC-1 is the most advanced stop-off tape ever to be offered to the
plating industry; because we use A "NON-CONTAMINATING ADHESIVE" with a
flexible PVC backing. It offers the following ADVANTAGES:
- Holds edge up to 210º F, and is especially
useful for masking in ELECTROLESS NICKEL and PLATING SOLUTIONS,
TYPE II & III ANODIZE, CHEMICAL MILLING, PAINTING, ABRASIVE BLAST,
SHOT PEENING and CHEMICAL STRIPPING (JANITORIAL)
- Excellent shelf-life (1 year @ 72º F).
Please compare SC-1's flexibility, adhesion, transparency and sot with
the tape you are now using. Because SC-1 is so flexible it
conforms to a straight edge without undercutting (do not stretch on a
flat surface), you can see through it for trimming; less expensive
that other tapes.
- APPLICATION REQUIRES NO PRIMER.
SIZES: 1/2", 3/4", 1", 1 1/2", 2:, 3" X 66'
ABRASIVE BLAST USE SC-1 YELLOW
IT'S BLASTED GOOD!
- VAPOR BLAST
- ABRASIVE BLAST
- CHEMICAL MILLING
- TOMBSTONE ENGRAVING
TECHNICAL DATA of SC-1
NO ADHESIVE RESIDUE
Leaves no adhesive residue Per customer's
Pinhole free PVC.
Tensile strength lb./in. width: 21.5
elongation at break
Di-electric strength volts: 10,000
life: 1year @ 72° F
Adhesive to steel: 16 oz./in. width
Adhesive to backing oz./in. width 15
Underwriters Lab., Inc. Approved:
Testing condition: -20° C, Relative humidity:
ATTENTION JANITORS... SC-1 YELLOW ADHESIVE
GOOD FOR STRIPPING FLOORS, ETC.
its Hycar/Nitrile adhesive on a soft poly vinyl
chloride backing is designed to prevent chemicals from undercutting
and attacking what it's applied to. DO NOT STRETCH SC-1 WHEN
APPLING OR IT WILL UNDERCUT.
SC-1 is highly praise by customers in the healthcare industry for
stripping floor. When a patient's room is vacated, masking off
the doorway allows you to strip patient's floor and rewax using the
same mask. Customers report it's superior to the many other
tapes they've tried. One stated they couldn't strip without it,
as they require a perfect straight edge.
WE SHIP THE SAME DAY WE RECEIVE THE